Skip to content

02 / Roofing services

Every service, with a real price beside it.

Typical 2026 ranges for Metro Vancouver's east side. Your written quote follows a free site visit.

01

Asphalt shingle replacement

Full tear-off to the deck, new synthetic underlayment, ice and water shield in every valley, ridge venting balanced to your attic. Architectural shingles in eleven colours.

Typical price
$14,500 to $28,000
typical 2,000 sq ft home
On-site time
2 to 3 days
Aerial view of a grey membrane low-slope roof with skylights

02

Standing seam metal

Panels roll-formed on site to the exact length of each plane, so there are no horizontal seams to leak. Concealed clips let the steel move through hot August afternoons and wet February nights.

Typical price
$32,000 to $58,000
typical 2,000 sq ft home
On-site time
5 to 8 days
Close-up of aligned charcoal standing seam metal roof panels

03

Cedar shake roofing

Hand-split western red cedar laid over breathable battens, the way older Fort Langley farmhouses were built. We match heritage profiles and stainless-fasten every course.

Typical price
$30,000 to $52,000
typical 2,000 sq ft home
On-site time
6 to 10 days
Close-up of fresh cedar shakes on a farmhouse roof

04

Low-slope and flat roofs

Torch-free two-ply membrane for townhouse decks, garages and modern flat additions, with tapered insulation so water leaves instead of pooling.

Typical price
$11 to $18
per sq ft, two-ply SBS membrane
On-site time
2 to 4 days

05

Repairs and leak response

Lifted shingles, cracked flashing, a drip above the bay window. We find the source, photograph it, fix it and tell you honestly whether repair or replacement makes sense.

Typical price
From $450
call-out, first hour included
On-site time
Same or next day

06

Gutters and eavestroughs

Seamless 5 and 6 inch troughs formed on site, oversized downspouts for Fraser Valley rain, and optional leaf guards for homes under the big maples.

Typical price
$14 to $24
per linear ft, seamless aluminum
On-site time
1 day

07

Skylights

New installs or replacements of foggy, leaking units. Factory flashing kits, interior trim finished so you never see where we were.

Typical price
$1,800 to $4,200
per unit, installed and flashed
On-site time
1 day

08

Inspection and care plan

A written 24-point report with photos. The annual plan adds a fall gutter clean, moss treatment and a spring walk-over after the winter storms.

Typical price
$295 / $389
single inspection / annual plan
On-site time
90 minutes

02.1 / Questions

Things people ask before we start.

Know what your roof will cost before anyone climbs a ladder.

CallGet a quote